BS ISO 17178:2013 BSI Standards Publication Adhesives Adhesives for bonding parquet to subfloor - Test methods and minimum requirements bsi. ..making excellence a habit. BSISO17178:2013 BRITISHSTANDARD National foreword This British Standard is the UK implementation of ISO 17178:2013. The UK participation in its preparation was entrusted to Technical Committee PRI/52,Adhesives. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @The British Standards Institution 2013.Published by BSI Standards Limited 2013 ISBN9780580756870 ICS 83.180 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2013. Amendments issued since publication Date Text affected BS ISO 17178:2013 ISO INTERNATIONAL STANDARD 17178 First edition 2013-04-15 Adhesives Adhesives for bonding parquet to subfloor - Test methods and minimum requirements Adhesifs-Adhesifs pour le collagede parquetau sol-Methodes d'essaietexigencesminimales Reference number ISO 17178:2013(E) [so @IS02013 BSISO17178:2013 IS0 17178:2013(E) COPYRIGHTPROTECTEDDOCUMENT IS02013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either Iso at the address below or Iso's member body in the country of the requester. ISO copyright office Case postale 56 . CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii @ IS0 2013 - All rights reserved BSISO17178:2013 IS0 17178:2013(E) Contents Page Foreword ..iv 1 Scope. 2 Normativereferences. ..1 ..1 3 Terms and definitions. 4 Testmethodsandprocedures .2 4.1 Samplingandtestconditions. 4.2 Testmethod fordetermining shear strength .2 4.3 Testmethodforthedeterminationoftensilestrength .4 4.4 Test method for determining shear strength of hard elastic and elastic adhesives .6 ..9 5 Test report. 6 Minimumrequirements. 9 @ IS0 2013 - All rights reserved iii BSISO17178:2013 IS0 17178:2013(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (IsO member bodies). The work of preparing International Standards is normally carried out through Iso technical committees.Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with Iso, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnicalstandardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISo/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of Iso documents should be noted. This document was drafted in accordance with the editorialrules oftheISo/IEC Directives, Part2.www.iso.org/directives Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.IsO shall not be held responsible for identifying any or all such patent rights.Details of anypatent rights identified during thedevelopment ofthe documentwillbe in the Introductionand/or Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. The committee responsiblefor this document is ISo/TC 61, Plastics, Subcommittee SC 11, Products. iv @ IS0 2013 - A