BS IS016063-31:2009+A1:2025 BSI Standards Publication Methods for the calibration of vibration and shock transducers Part 31:Testing of transverse vibration sensitivity bsi. BS ISO16063-31:2009+A1:2025 BRITISH STANDARD National foreword This British Standard is the UKimplementation of ISO16063-31:2009+A1:2025.It supersedes BS ISO 16063-31:2009,which iswithdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags.Tags indicating changes to ISO text carry the number of the ISO amendment.For example,text altered by ISO amendment 1 is indicated byA. The UK participation in its preparation was entrusted to Technical Committee GME/21,Mechanical vibration,shock and condition monitoring. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith,however no implied)is or will be made,and no responsibility or liability is or will be accepted byBsI in relation to the adequacy,accuracy,completeness or reasonableness of this publication.All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is,and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract.Users are responsible for its correct application. C The British Standards Institution 2025 Published by BSI Standards Limited 2025 ISBN 9780539273380 ICS 17.160 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Amendments/corrigenda issued since publication Date Text affected 31 March 2025 Implementation of ISO amendment 1:2025 BS ISO16063-31:2009+A1:2025 INTERNATIONAL ISO STANDARD 16063-31 +A1 First edition 2009-08-15 Amendment 1 2025-03 Methods for the calibration of vibration and shock transducers- Part 31: Testing of transverse vibration sensitivity Methodes pour letalonnage des transducteurs de vibrations et de chocs Partie 31:Essai de sensibilite aux vibrations transversales Referencenumber ISO 16063-31:2009(E) ISO @ISO 2009 BS ISO16063-31:2009+A1:2025 ISO 16063-31:2009(E) PDF disclaimer This PDF fle may contain embedded typefaces.ln accordance with Adobe's licensing policy,this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing.ln downloading. this file,parties accept therein the responsibility of not infringing Adobe's licensing policy.The ISO Central Secretariat accepts no Tiability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file;the PDF-creation parameters were optimized for printing.Every care has been taken to ensure that the file is suitable for use by ISO member bodies.In COPYRIGHT PROTECTED DOCUMENT @ISO2009 Al ights reserved.Unless otherwise specified,no part of this publication may be reproduced or utilized in any form or by any means, IsO's member body in the country of the requester. ISO copyright office Case postale 56·CH-1211 Geneva 20 Tel.+41227490111 Fax+41227490947 E-mail [email protected] Web www.iso.org Published in Switzerland ii @ISO 2009-All rights reserved BSISO16063-31:2009+A1:2025 ISO 16063-31:2009(E) Contents Page Foreword 1 Scope 2 Normative references 3 Uncertainty consideration 4 Determinationof transverse sensitivity usinga single-axis vibrationgenerator 4.1 Apparatus 4.2 Method 4.2.1 Test procedure 4.2.2 Expression of result .. 5 Determination of the transverse sensitivity using a vibration generator with turntable 5.1 Apparatus 5.2 Method 5.3 Expression of result .. 6 Determination of transverse sens